Home / Tools / Simulators / Identix SLP simulator

Identix SLP RFID simulator

Put SLP on the ceiling of a store exit, with the SLP Overhead Reader or with the GateView OTP (two 90C4090 antennas and an EZ700 or EZ500 reader), and walk a person out with tagged goods in a bag. The unit sees two read zones, A and B; SLP sounds the alarm for the items that cross from one zone to the other toward the exit. A clothes rack beside the exit is always in the scene.

Loading the simulator…

What this simulator calculates

It estimates how Identix SLP on the ceiling of a store exit, with the SLP Overhead Reader or the GateView OTP, detects a person who walks out with item-level RAIN RFID tagged goods in a bag, and how often a clothes rack beside the exit raises a false alarm. It compares the same exit without SLP, with the Connectix brAIn and with SLP.

What you can set

  • The unit (SLP Overhead Reader or GateView OTP), the mounting height, tilt and the passage width.
  • Power, cable loss and RSSI filter per RF port; in the GateView OTP, the EZ700 or EZ500 reader.
  • How the goods pass: a bag, a backpack, garments over the arm or a box in a cart; one or two people, the speed and the direction.

What you see

  • The tags a typical pass reads, and the read failures as a count of tags over the simulated passes.
  • The same setup with Impinj Gen2X on and off, side by side.
  • A 3D view of the pass: the lobe of each antenna, the zone where a tag is read in at least 90% of the tries, and the chance of a read per tag.
  • Notes on the setup, such as the EIRP of each antenna against the local limit you type in.
  • Stray reads: how often goods that must not be read (beside the reader, the next load, a neighbour) are read, with an alert and how to reduce them.

Questions about the simulator

Is the simulator free? Do I need to install anything?

It is free and runs in the browser, with no sign-up and nothing to install. It needs JavaScript and a browser with WebGL for the 3D view.

Does the result replace a test on site?

No. It is an estimate from a propagation model, the antenna patterns and premises from the literature. Use it to compare setups and prepare the project, then confirm with a pilot on site, with the real tags and products. Identix can help you plan that test.

Who is it for?

For system integrators, meaning any company that builds its own solution, in full or in part: software companies that use Identix readers, makers of their own portals or reading cabinets who buy only antennas or readers, and also installers and end users who are planning a project.

How does SLP know that an item left?

The unit sees two read zones, A and B: the two inputs of the SLP Overhead Reader, or the two 90C4090 antennas of the GateView OTP. SLP sounds the alarm for the items that cross from one zone to the other toward the exit.

What is a stray read and how do I reduce it?

An alarm for goods that did not leave, such as the garments on a rack beside the exit. The rack is always in the simulator scene, so you see how often it happens without SLP, with brAIn and with SLP. Keeping racks away from the exit, the RSSI filter and SLP, which sounds only for items that cross from zone A to zone B, reduce it.