Home / Tools / Simulators / SpotView Gateway simulator

SpotView Gateway RFID simulator

Mount SpotView Gateways on the store ceiling and see how many items on the racks each inventory finds; then walk a person under a unit with tagged goods in a bag, a clothes rack beside the passage. Its internal reader steps through 9 beams, each in two linear polarizations, with its own power per beam.

Loading the simulator…

Product page: SpotView Gateway

What this simulator calculates

It estimates how many item-level RAIN RFID tags one SpotView Gateway reads on a person walking under it, and tells the direction of the pass from the beams that lean toward each side. It also simulates a store inventory: the racks around the unit read standing still, with the share read on each rack.

What you can set

  • Mounting height and power per beam: the internal reader steps through 9 beams, each in two linear polarizations.
  • How the items pass: a bag, a backpack, garments over the arm, a box in a cart or a garment rack; one or two people, the speed and the direction.
  • Store inventory: 1, 2 or 4 units on the ceiling, a reading time of 2 to 60 s and the garments on each rack.

What you see

  • The tags a typical pass reads, and the read failures as a count of tags over the simulated passes.
  • The same setup with Impinj Gen2X on and off, side by side.
  • A 3D view of the pass: the lobe of each antenna, the zone where a tag is read in at least 90% of the tries, and the chance of a read per tag.
  • Notes on the setup, such as the EIRP of each antenna against the local limit you type in.
  • Stray reads: how often goods that must not be read (beside the reader, the next load, a neighbour) are read, with an alert and how to reduce them.

Questions about the simulator

Is the simulator free? Do I need to install anything?

It is free and runs in the browser, with no sign-up and nothing to install. It needs JavaScript and a browser with WebGL for the 3D view.

Does the result replace a test on site?

No. It is an estimate from a propagation model, the antenna patterns and premises from the literature. Use it to compare setups and prepare the project, then confirm with a pilot on site, with the real tags and products. Identix can help you plan that test.

Who is it for?

For system integrators, meaning any company that builds its own solution, in full or in part: software companies that use Identix readers, makers of their own portals or reading cabinets who buy only antennas or readers, and also installers and end users who are planning a project.

How does it tell the direction of the pass?

From the signal strength (RSSI) of the beams that lean toward side A against those that lean toward side B. The centre beam only stands in for one side when that side did not read the tag.

What is a stray read and how do I reduce it?

At a passage, a read of a tag that did not cross, such as a rack near the passage; in an inventory, a tag outside the area (stockroom, shop window, the store next door), which the model does not include. Turn on the rack near the passage in the simulator to see how often it is read. More distance, fewer or weaker sectors facing the store, the RSSI filter and the direction from the order of the sectors reduce it.