BoxView RFID table simulator
Put one box on the BoxView roller table, with tags on the items inside it. See an estimate of how many item tags each check reads.
Loading the simulator…
© Identix. All rights reserved. This simulator, its code and its data are proprietary. Copying, reuse or redistribution without written permission from Identix is not allowed.
What this simulator calculates
It estimates how many item-level RAIN RFID tags the BoxView roller table reads in one box: the box tag is left out and each item inside carries its own tag. Each check varies the fading and the tag lot, so the result is a spread of checks.
What you can set
- Reader: EZ700, EZ500 or EM300, with Impinj Gen2X on or off.
- The antennas under the table: 85C7070, 75L9090, ANTNF0 or ANTNF1 (near field), with polarization along or across the table, power and cable loss of each.
- How the box goes over the antennas: standing still for a manual check, with the time it stays, or passing on the rollers; a quarter turn halfway.
- Box size, the product inside, how many items and the tag model.
- The environment and how far the box sits off the centre of the table.
What you see
- The tags a typical pass reads, and the read failures as a count of tags over the simulated passes.
- The same setup with Impinj Gen2X on and off, side by side.
- A 3D view of the pass: the lobe of each antenna, the zone where a tag is read in at least 90% of the tries, and the chance of a read per tag.
- Notes on the setup, such as the EIRP of each antenna against the local limit you type in.
- Stray reads: how often goods that must not be read (beside the reader, the next load, a neighbour) are read, with an alert and how to reduce them.
Questions about the simulator
Is the simulator free? Do I need to install anything?
It is free and runs in the browser, with no sign-up and nothing to install. It needs JavaScript and a browser with WebGL for the 3D view.
Does the result replace a test on site?
No. It is an estimate from a propagation model, the antenna patterns and premises from the literature. Use it to compare setups and prepare the project, then confirm with a pilot on site, with the real tags and products. Identix can help you plan that test.
Who is it for?
For system integrators, meaning any company that builds its own solution, in full or in part: software companies that use Identix readers, makers of their own portals or reading cabinets who buy only antennas or readers, and also installers and end users who are planning a project.
Standing still or passing: which reads more?
It depends on the box. Standing still is the manual check at the station; passing is a box pushed or carried by powered rollers. A quarter turn halfway moves every tag to a new place over the antennas, so a badly placed tag gets new chances; waiting longer does not.
What is a stray read and how do I reduce it?
A read of a tag that is not in the box on the table, such as the next box waiting in the queue. Turn on the next box in the simulator to see how often it is read. More space between the boxes, a lower power, the RSSI filter and reading only while a presence sensor sees the box on the table reduce it.